30W Motion Sensor and 2.4 GHz 8 Lighting Modes Self-Organizing Network Solar Flood Light

• Customization: Available
• After-sales Service: Lifetime Service
• Warranty: Lifetime Service
• Model NO.: HL-BI30P24G-8-SO
• Lamp Body Material: Aluminum Alloy
• Light Type: Solar
• Color Temperature: 6000K/4000K/3000K (Option)
• Power: ≥30W
• Technics: Painted Matte
• Illumination Time: 8h
• Cell Type: Lithium Battery
• Charging Time (H): 6
• Usage: Garden, Street
• IP Rating: IP65
• Certification: CE, RoHS
• Voltage: 12/24V
• With Light Source: With Light Source
• Solar Panel Power: 18V30W
• Solar Panel Size: 450X345X25mm
• Solar Panel Efficiency: 22%
• LED Light Power: 30W
• LED Chips: 45PCS 3030SMD
• Light Luminous Efficiency: 175lm/W
• Luminous Flux: 3785lm
• Work Mode: PIR Sensor
• Li-ion Battery: 12.6V11ah
• Battery Power: 138.6wh
• Beam Angle: 120X140 Degree
• Running Time: >5 Hours
• Rendering Index: >75
• Transport Package: Cartons and Pearl Cotton or Pallet
• Specification: Light Size 282x204x52 mm
• Trademark: Goginsor or OEM
• Origin: China
• HS Code: 9405410000
• Production Capacity: 50000PCS/Year
• Package Size: 46.00cm * 13.00cm * 40.00cm
• Package Gross Weight: 5.000kg
• Lead Time: 5 days (1 - 2 Pieces) ; To be negotiated ( > 2 Pieces)

Product Description

  Charging Indicator Light

          LED Indicator to show current battery level and charging status.       

                                      Green LED -    70% - 100% Charged               
                                      Yellow LED -   30% - 70% Charged

                                               Red LED -   30% Charge or Less

                                     Flashing LED of any color - Battery Charging 

   Please Note:
       The indicator will flash when charging, and when fully charged, it will display green.
      On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control and the PIR Module, it must always be on.
 

Remote control instructions:

Syncing the Remote Control to the Solar Light 

Syncing the Remote Control to the Solar Light

1. Find bottom of the light, which is a control panel with a switch, and the indicator light should not be visible.
2. Keep holding the MASTER ON button ("I" is ON "O" is OFF),and push the power button on the light head, continue to hold the MASTER ON button.
3. The solar light head will light and flash gently three times indicating the program has been accepted
4. Release the MASTER ON button.
5. The light is now is standard mode and can now be turned ON/OFF with the MASTER "I" and "O" at the top of the remote and dimmed using the dimmer buttons.
6. Now select a work mode from the below

     

Work Modes
  The Solar Light has 8 pre-programed work modes.

Mode Key	Mode Name	Running Mode
1 I	Mode  1	Light on 30% from dark to dawn.
2 I	Mode  2	Light on 50% for 8hrs, and then Light off.
3 I	Mode  3	Light on 80% for 4hrs, and then Light off.
4 I	Mode  4	Light on 100% for 2hrs, and then Light off.
1O	PISensor Mode1	Light on 100% for 3hrs, then to 0% until motion is detected, where the light will operate at 50%.
2O	PIR Sensor Mode 2	Light on 100% for 3hrs, then to 5%, until motion is detected, where the light will operate at 50%.
3O	PIR Sensor Mode 3	Light will not turn on unless motion is detected, where the light will operate at 100%.
4O	Mode RF	returns remote to normal mode (as per left image)

Note:
    1. Once a program mode is selected the Batten light cannot be turned ON/OFF or dimmed with       the Master button. Choose button '4O' (RF Mode) to revert to standard mode to control these functions.
    2. In this version, the remote control cannot control groups separately, and even if the remote  control mode (4O)is selected, it can only control all lights together.

 

2.4GHz self-organizing network instructions

When these lights are installed one after another, spaced about 50 meters apart, and they are synchronized with the same remote control, they will automatically network and form a local area network. In the network, each lamp is equivalent to a signal relay, so it can propagate signal forward one after another, which is suitable for controlling multiple lamps.
 

   

Programme Clear 
     If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
        1. Turn on the light.
        2.  Quickly press Master " I " key 5 times.
        3. LED lights will blink 5 times which means that the Programme is cleared successfully.

Adjust the PIR Sensor 

    LUX Dial: Adjusts the level of darkness at Dusk that must be reached before the light turns on.                                                     
    TIME Dial: Adjust delay time from 5 seconds to 5 minutes.               
    SENS Dial: Adjust the sensitivity from min. to max. (about 0-12 meters).

The Remote Control

 

Detailed Photos

 

Packaging & Shipping

 

Company Profile

 

FAQ

1. Are you a factory or a trading company?

 A: We are a manufacturer. Welcome OEM and ODM for you.

2. Can we have a sample order?

A: Of course! Any sample order is welcome for testing and checking.

3.What is the warranty for the products?

A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years

4. What about the lead time?

 A:Sample needs 3-5 days, mass production time needs 2-3weeks.

5.How to ship the goods?

A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)

6.How to deal with the faulty? 

A: Firstly,Our products are produced in strict quality control system and the defective rate will be less than 0.2%.Secondly,
during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution including re-call according to real situation.