Triproof Solar LED Tube Light Batten with Eight Lighting Modes for Parking Lot Platform

• Customization: Available
• After-sales Service: Lifetime Service
• Warranty: 3 Years
• Model NO.: HL-BT30P-R24G-8
• Lamp Body Material: Aluminum Alloy
• Light Type: Solar
• Color Temperature: 6000K/4000K/3000K (Option)
• Power: ≥30W
• Technics: Painted Matte
• Illumination Time: 8h
• Cell Type: Lithium Battery
• Charging Time (H): 6
• Usage: Garden, Street, Indoor, Parking Lot, Bus Stop
• IP Rating: IP65
• Certification: CE, RoHS
• Voltage: 30V
• With Light Source: With Light Source
• Solar Panel Size: 650X345X25mm
• Solar Panel Chip: Mono Crystalline Silicon
• Solar Panel Power: 18V30W
• Solar Panel Efficiency: 22%
• Light Tube Size: 83X48X600mmmm
• Light Power: 30W
• LED Chips: 120PCS 3030SMD
• Light Luminous Efficiency: 175lm/W
• Work Mode: 8 Modes for RF+PIR Sensor
• Distance of Remote Contro: Appr.100m
• Li-ion Battery: 12.6V11ah
• Battery Power: 138.6wh
• Beam Angle: 120 Degree
• Running Time: 5-50 Hours
• Rendering Index: 85
• Transport Package: Cartons and Pearl Cotton or Pallet
• Specification: Package/Pcs 690x120x400mm
• Trademark: Goginsor or OEM
• Origin: China
• HS Code: 9405410000
• Production Capacity: 2000PCS/Month

Product Description

Product Description

 1. Solar Batten (Tri-Proof) Light 30W Tube with 2.4G Remote Control is an advanced commercial-grade energy-efficient lighting system powered
      by Solar Energy and battery.

2. The range between the light and Remote control can be up to 100m.

4. It can be adjusted brightness 8% to 100% via the Remote Controller.and last for 50 hours at 8% brightness.

5. Extended and Improved 18V 30W Solar Panel with High Energy Conversion rate to charge full the battery in 5-6h in sunny weather conditions.

6. Detached Solar Panel design with 3m extension cord allows keeping the panel outdoor at the direct sunlight while the light can be used at
    shaded locations or indoor.

7. Suitable for outdoor and indoor use including daytime operation.

8.Durable Body made of Aluminium combined with industrial-grade pc. enhanced heatproof and weather resistance.

 

  Syncing the Remote Control to the Solar Light 

Syncing the Remote Control to the Solar Batten Light

1. Find one end of the batten light, which is a control panel with a switch, and the indicator light should not be visible.
2. Keep holding the MASTER ON button ("I" is ON "O" is OFF),and push the power button on the light head, continue to hold the MASTER ON button.
3. The solar light head will light and flash gently three times indicating the program has been accepted
4. Release the MASTER ON button.
5. The light is now is standard mode and can now be turned ON/OFF with the MASTER "I" and "O" at the top of the remote and dimmed using the dimmer buttons.
6. Now select a work mode from the below

Work Modes
  The Solar Batten Light has 8 pre-programed work modes.

Mode Key	Mode Name	Running Mode
1 I	Mode  1	Light on 30% from dark to dawn.
2 I	Mode  2	Light on 50% for 8hrs, and then Light off.
3 I	Mode  3	Light on 80% for 4hrs, and then Light off.
4 I	Mode  4	Light on 100% for 2hrs, and then Light off.
1O	PIR Mode 1	Light on 100% for 3hrs, then to 0% until motion is detected, where the light will operate at 50%.
2O	PIR Mode 2	Light on 100% for 3hrs, then to 5%, until motion is detected, where the light will operate at 50%.
3O	PIR Mode 3	Light will not turn on unless motion is detected, where the light will operate at 100%.
4O	Mode RF	returns remote to normal mode (as per left image)

Note:
    1. Once a program mode is selected the Batten light cannot be turned ON/OFF or dimmed with the Master
         button. Choose button '4O' (RF Mode) to revert to standard mode to control these functions.
    2. In this version, the remote control cannot control groups separately, and even if the remote control mode
     (4O)is selected, it can only control all lights together.

  Programme Clear 
     If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
    1. Turn on the light
        2.  Quickly press Master " I " key 5 times
        3. LED lights will blink 5 times which means that the Programme is cleared successfully.

Charge and discharge indicator LED

     1. Solid Green LED = Battery full Charged
     2. Flashing Green or Yellow or Red = Battery charging
     3. Battery Level Display:
            Green LED = High Volt ( >11.5V ),
            Yellow LED = Medium Volt (11.5-10.5V),
            Red    LED  = Low Volt  (<10.5V).

  Please Note:The indicator will flash when charging, and when fully charged, it will display green.

On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control, it must always be on.

Adjust the PIR Sensor Delay Timer
 

The left instructions indicate how to adjust the amount of

time the light will stay on when the PIR sensor is triggered,

when operating using any of the above-mentioned

'PIR Modes'.

The timer can be adjusted from 10-300 seconds. The default

timer setting is 10 seconds.

The light will constantly operate while the sensor is being

triggered.  



Steps:
 

1. On the sensor end of the tube, use your thumb to

         pull apart the buckles on both sides.

     2.Use a Phillips head screwdriver to turn the delay

        adjustment knob clockwise to the desired time.

 

Detailed Photos

Installation Instructions

 

Certifications

Packaging & Shipping

 

FAQ

1.Q: Are you a factory or a trading company?

A: We are a manufacturer. Welcome OEM and ODM for you.

2. Can we have a sample order?

A: Of course! Any sample order is welcome for testing and checking.

3.What is the warranty for the products?

A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years

4.How to ship the goods?

A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)

5. How to deal with the fault?

A: If the problem caused by manufacturing quality, we will change and replace it in free.