Solar Flood Light with Motion Detected Sensor and 2.4G Remote Control

• After-sales Service: Lifetime Service
• Warranty: 3 Years
• Light Source: LED Lamp
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: HL-BI30P24-8-SO
• Lamp Body Material: Aluminum Alloy
• Light Type: Solar
• Color Temperature: 6000K/4000K/3000K (Option)
• Power: ≥30W
• Technics: Painted Matte
• Illumination Time: 8h
• Cell Type: Lithium Battery
• Charging Time (H): 6
• Usage: Garden, Street, Indoor, Parking Lot
• IP Rating: IP65
• Certification: CE, RoHS
• Voltage: 30V
• With Light Source: With Light Source
• Solar Panel Power: 18V30W
• Solar Panel Size: 650X345X25mm
• Solar Panel Efficiency: 22%
• LED Light Power: 30W
• LED Chips: 45PCS 3030SMD
• Light Luminous Efficiency: 175lm/W
• Luminous Flux: 3785lm
• Work Mode: Run Automatically
• Li-ion Battery: 12.6V11ah
• Battery Power: 138.6wh
• Beam Angle: 120X140 Degree
• Running Time: >12 Hours
• Rendering Index: >75
• Transport Package: Cartons and Pearl Cotton or Pallet
• Specification: Light Size 310.5x220x50mm
• Trademark: Goginsor or OEM
• Origin: China
• HS Code: 9405410000
• Production Capacity: 50000PCS/Year

Product Description

Basic Features of the Solar Batten Light
      Charging Indicator Light - LED Indicator to show current charging status. When first unboxed, please allow the batten light to charge 
                                                     completely before use.
        1. Solid Green LED = Battery full Charged
         2. Flashing Green or Yellow or Red = Battery charging
         3. Battery Level Display:
            Green LED = High Volt(12.6V-11.8V),
            Yellow LED = Medium Volt(11.8-10.2V),
            Red     Led  = Low Volt(10.2V-9V).
   Please Note:The indicator will flash when charging, and when fully charged, it will display green.
  On/Off Switch - Will turn the Batten Light On and Off Manually. When using the remote control, it must always be on.

Syncing the Remote Control to the Solar Light 

 

Syncing the Remote Control to the Solar Batten Light

1. Find one end of the batten light, which is a control panel with a switch, and the indicator light should not be visible.

       2. Keep holding the MASTER ON button ("I" is ON "O" is OFF),
           and push the power button on the light head, continue to hold
           the MASTER ON button.
       3.The solar light head will light and flash gently three times
           indicating the program has been accepted
       
        4. Release the MASTER ON button.

        5. The light is now is standard mode and can now be turned
            ON/OFF with the MASTER "I" and "O" at the top of the remote
             and dimmed using the dimmer buttons.
     
       6.Now select a work mode from the below.

Work Modes
  The Solar Batten Light has 8 pre-programed work modes.

Mode Key	Mode Name	Running Mode
1 I	Mode  1	Light on 30% from dark to dawn.
2 I	Mode  2	Light on 50% for 8hrs, and then Light off.
3 I	Mode  3	Light on 80% for 4hrs, and then Light off.
4 I	Mode  4	Light on 100% for 2hrs, and then Light off.
1O	PIR Mode 1	Light on 100% for 3hrs, then to 0% until motion is detected, where the light will operate at 50%.
2O	PIR Mode 2	Light on 100% for 3hrs, then to 5%, until motion is detected, where the light will operate at 50%.
3O	PIR Mode 3	Light will not turn on unless motion is detected, where the light will operate at 100%.
4O	Mode RF	returns remote to normal mode (as per left image)

Note:
    1. Once a program mode is selected the Batten light cannot be turned
        ON/OFF or dimmed with the Master button. Choose button '4O'
        (RF Mode) to revert to standard mode to control these functions.
    2. In this version, the remote control cannot control groups separately,
        and even if the remote control mode (4O)is selected, it can only
        control all lights together.

  Programme Clear 
     If you want to clear the programming of the remote control and lights to restore the factory settings. Please do the following.
        1. Turn on the light.
        2.  Quickly press Master " I " key 5 times.
        3. LED lights will blink 5 times which means that the Programme is cleared successfully.

Adjust the PIR Sensor 
                          1. LUX Dial:  Adjusts the level of darkness at Dusk that must be reached before the light turns on.                                           
                          2. TIME Dial: Adjust delay time from 5 seconds to 5 minutes.                
                          3. SENS Dial: Adjust the sensitivity from min. to max. (about 0-12 meters).

FAQ

1.Q: Are you a factory or a trading company?

A: We are a manufacturer. Welcome OEM and ODM for you.

2. Can we have a sample order?

A: Of course! Any sample order is welcome for testing and checking.

3.What is the warranty for the products?

A: Battery:3 years. Controller/LED:5 years. solar panels:15-20 years

4.How to ship the goods?

A: By sea usually. If urgent requirement, air-shipping is available(except:Batteries)

5. How to deal with the fault?

A: If the problem caused by manufacturing quality, we will change and replace it in free.